Verbesserungen von Flip eingearbeitet

Breakout Board/rpi_can.brd

@@ -3466,7 +3466,7 @@ design rules under a new name.</description>
 <element name="IC1" library="74xx-eu" package="SO16" value="74HC595D" x="52.07" y="41.275" rot="R90"/>
 <element name="C2" library="resistor" package="C0805" value="100n" x="39.37" y="29.845" rot="R180"/>
 <element name="R11" library="resistor" package="R0805" value="4.3k" x="6.985" y="31.75" rot="R180"/>
-<element name="R12" library="resistor" package="R0805" value="4.3k" x="6.985" y="23.8125" rot="R180"/>
+<element name="R12" library="resistor" package="R0805" value="4.3k" x="6.985" y="24.13" rot="R180"/>
 <element name="C3" library="resistor" package="C0805" value="100n" x="11.1125" y="29.21"/>
 <element name="C4" library="resistor" package="C0805" value="100n" x="6.985" y="34.29" rot="R180"/>
 <element name="R13" library="resistor" package="R0805" value="4.3k" x="6.985" y="45.085" rot="R180"/>
@@ -3837,14 +3837,14 @@ design rules under a new name.</description>
 <contactref element="C9" pad="-"/>
 <via x="6.0325" y="17.4625" extent="1-16" drill="0.5" diameter="0.6096"/>
 <via x="14.605" y="10.16" extent="1-16" drill="0.5" diameter="0.6096"/>
-<via x="29.21" y="10.4775" extent="1-16" drill="0.5"/>
+<via x="29.21" y="10.16" extent="1-16" drill="0.5"/>
 </signal>
 <signal name="T11">
 <contactref element="TASTER" pad="2"/>
 <contactref element="R7" pad="1"/>
 <contactref element="R12" pad="2"/>
 <wire x1="3.175" y1="26.67" x2="6.135" y2="26.67" width="0.3048" layer="1"/>
-<wire x1="6.135" y1="23.8125" x2="6.135" y2="26.67" width="0.3048" layer="1"/>
+<wire x1="6.135" y1="24.13" x2="6.135" y2="26.67" width="0.3048" layer="1"/>
 </signal>
 <signal name="T21">
 <contactref element="TASTER" pad="3"/>
@@ -4129,9 +4129,9 @@ design rules under a new name.</description>
 <wire x1="12.065" y1="34.6075" x2="23.8125" y2="46.355" width="0.3048" layer="16"/>
 <wire x1="23.8125" y1="46.355" x2="23.8125" y2="51.7525" width="0.3048" layer="16"/>
 <wire x1="23.8125" y1="51.7525" x2="22.86" y2="52.705" width="0.3048" layer="16"/>
-<wire x1="7.835" y1="23.8125" x2="9.525" y2="23.8125" width="0.3048" layer="1"/>
-<wire x1="9.525" y1="23.8125" x2="10.16" y2="24.4475" width="0.3048" layer="1"/>
-<wire x1="10.16" y1="24.4475" x2="10.16" y2="29.1075" width="0.3048" layer="1"/>
+<wire x1="7.835" y1="24.13" x2="9.525" y2="24.13" width="0.3048" layer="1"/>
+<wire x1="9.525" y1="24.13" x2="10.16" y2="24.765" width="0.3048" layer="1"/>
+<wire x1="10.16" y1="24.765" x2="10.16" y2="29.1075" width="0.3048" layer="1"/>
 <wire x1="10.16" y1="29.1075" x2="10.2625" y2="29.21" width="0.3048" layer="1"/>
 <wire x1="10.16" y1="31.75" x2="10.16" y2="29.1075" width="0.3048" layer="1"/>
 <wire x1="12.065" y1="34.6075" x2="12.065" y2="33.655" width="0.3048" layer="16"/>
@@ -4160,13 +4160,13 @@ design rules under a new name.</description>
 <via x="17.78" y="16.1925" extent="1-16" drill="0.5"/>
 <wire x1="18.415" y1="17.78" x2="18.415" y2="39.0525" width="0.3048" layer="16"/>
 <wire x1="18.415" y1="39.0525" x2="25.0825" y2="45.72" width="0.3048" layer="16"/>
-<wire x1="25.0825" y1="45.72" x2="25.0825" y2="50.4825" width="0.3048" layer="16"/>
-<wire x1="26.67" y1="52.07" x2="26.67" y2="53.975" width="0.3048" layer="16"/>
+<wire x1="25.0825" y1="45.72" x2="25.0825" y2="49.8475" width="0.3048" layer="16"/>
+<wire x1="26.67" y1="51.435" x2="26.67" y2="53.975" width="0.3048" layer="16"/>
 <wire x1="26.67" y1="53.975" x2="25.4" y2="55.245" width="0.3048" layer="16"/>
 <wire x1="17.78" y1="16.1925" x2="17.78" y2="17.145" width="0.3048" layer="16"/>
 <wire x1="17.78" y1="17.145" x2="18.415" y2="17.78" width="0.3048" layer="16"/>
 <wire x1="12.065" y1="8.47" x2="12.065" y2="12.1675" width="0.3048" layer="1"/>
-<wire x1="25.0825" y1="50.4825" x2="26.67" y2="52.07" width="0.3048" layer="16"/>
+<wire x1="25.0825" y1="49.8475" x2="26.67" y2="51.435" width="0.3048" layer="16"/>
 <wire x1="19.685" y1="13.765" x2="19.685" y2="16.08" width="0.3048" layer="1"/>
 <wire x1="17.145" y1="11.9625" x2="17.145" y2="13.335" width="0.3048" layer="1"/>
 <wire x1="17.145" y1="13.335" x2="17.575" y2="13.765" width="0.3048" layer="1"/>
@@ -4187,41 +4187,42 @@ design rules under a new name.</description>
 <contactref element="SV1" pad="18"/>
 <via x="22.225" y="5.08" extent="1-16" drill="0.6"/>
 <wire x1="19.05" y1="38.735" x2="25.7175" y2="45.4025" width="0.3048" layer="16"/>
-<wire x1="25.7175" y1="45.4025" x2="25.7175" y2="49.2125" width="0.3048" layer="16"/>
+<wire x1="25.7175" y1="45.4025" x2="25.7175" y2="48.5775" width="0.3048" layer="16"/>
 <wire x1="29.21" y1="52.07" x2="29.21" y2="53.975" width="0.3048" layer="16"/>
 <wire x1="29.21" y1="53.975" x2="27.94" y2="55.245" width="0.3048" layer="16"/>
-<wire x1="19.05" y1="38.735" x2="19.05" y2="20.32" width="0.3048" layer="16"/>
-<wire x1="19.05" y1="20.32" x2="22.225" y2="17.145" width="0.3048" layer="16"/>
-<wire x1="22.225" y1="17.145" x2="22.225" y2="5.08" width="0.3048" layer="16"/>
-<wire x1="25.7175" y1="49.2125" x2="27.94" y2="51.435" width="0.3048" layer="16"/>
-<wire x1="27.94" y1="51.435" x2="28.575" y2="51.435" width="0.3048" layer="16"/>
-<wire x1="28.575" y1="51.435" x2="29.21" y2="52.07" width="0.3048" layer="16"/>
+<wire x1="19.05" y1="38.735" x2="19.05" y2="19.685" width="0.3048" layer="16"/>
+<wire x1="19.05" y1="19.685" x2="22.225" y2="16.51" width="0.3048" layer="16"/>
+<wire x1="22.225" y1="16.51" x2="22.225" y2="5.08" width="0.3048" layer="16"/>
 <wire x1="14.605" y1="4.445" x2="14.605" y2="6.77" width="0.3048" layer="1"/>
 <wire x1="14.605" y1="6.77" x2="17.145" y2="6.77" width="0.3048" layer="1"/>
 <wire x1="17.145" y1="6.77" x2="22.1225" y2="6.77" width="0.3048" layer="1"/>
 <wire x1="22.1225" y1="6.77" x2="22.225" y2="6.8725" width="0.3048" layer="1"/>
 <wire x1="22.225" y1="6.8725" x2="24.765" y2="6.8725" width="0.3048" layer="1"/>
 <wire x1="22.225" y1="5.08" x2="22.225" y2="6.8725" width="0.3048" layer="1"/>
+<wire x1="29.21" y1="52.07" x2="25.7175" y2="48.5775" width="0.3048" layer="16"/>
 </signal>
 <signal name="WLVL">
 <contactref element="SV1" pad="22"/>
-<via x="33.655" y="9.8425" extent="1-16" drill="0.5"/>
-<wire x1="33.655" y1="9.8425" x2="33.655" y2="12.7" width="0.3048" layer="16"/>
-<wire x1="45.72" y1="24.765" x2="45.72" y2="45.085" width="0.3048" layer="16"/>
-<wire x1="45.72" y1="45.085" x2="39.37" y2="51.435" width="0.3048" layer="16"/>
-<wire x1="39.37" y1="51.435" x2="39.37" y2="53.34" width="0.3048" layer="16"/>
-<wire x1="39.37" y1="53.34" x2="38.735" y2="53.975" width="0.3048" layer="16"/>
-<wire x1="38.735" y1="53.975" x2="34.29" y2="53.975" width="0.3048" layer="16"/>
-<wire x1="34.29" y1="53.975" x2="33.02" y2="55.245" width="0.3048" layer="16"/>
 <contactref element="R24" pad="2"/>
 <contactref element="R14" pad="1"/>
 <contactref element="D7" pad="C"/>
-<wire x1="33.655" y1="12.7" x2="45.72" y2="24.765" width="0.3048" layer="16"/>
 <wire x1="31.115" y1="8.47" x2="33.655" y2="8.47" width="0.3048" layer="1"/>
 <wire x1="27.305" y1="6.8725" x2="28.4625" y2="6.8725" width="0.3048" layer="1"/>
 <wire x1="31.115" y1="8.47" x2="30.06" y2="8.47" width="0.3048" layer="1"/>
 <wire x1="30.06" y1="8.47" x2="28.4625" y2="6.8725" width="0.3048" layer="1"/>
-<wire x1="33.655" y1="8.47" x2="33.655" y2="9.8425" width="0.3048" layer="1"/>
+<wire x1="33.02" y1="55.245" x2="31.75" y2="53.975" width="0.3048" layer="16"/>
+<wire x1="31.75" y1="53.975" x2="31.75" y2="52.07" width="0.3048" layer="16"/>
+<wire x1="31.75" y1="52.07" x2="31.115" y2="51.435" width="0.3048" layer="16"/>
+<wire x1="31.115" y1="51.435" x2="29.5275" y2="51.435" width="0.3048" layer="16"/>
+<wire x1="29.5275" y1="51.435" x2="26.3525" y2="48.26" width="0.3048" layer="16"/>
+<wire x1="26.3525" y1="48.26" x2="26.3525" y2="45.085" width="0.3048" layer="16"/>
+<wire x1="26.3525" y1="45.085" x2="19.685" y2="38.4175" width="0.3048" layer="16"/>
+<wire x1="19.685" y1="38.4175" x2="19.685" y2="20.0025" width="0.3048" layer="16"/>
+<wire x1="19.685" y1="20.0025" x2="23.1775" y2="16.51" width="0.3048" layer="16"/>
+<wire x1="23.1775" y1="16.51" x2="24.4475" y2="16.51" width="0.3048" layer="16"/>
+<wire x1="24.4475" y1="16.51" x2="31.115" y2="10.16" width="0.3048" layer="16"/>
+<via x="31.115" y="10.16" extent="1-16" drill="0.5"/>
+<wire x1="31.115" y1="10.16" x2="31.115" y2="8.47" width="0.3048" layer="1"/>
 </signal>
 <signal name="I2C/SDA">
 <contactref element="SV1" pad="3"/>