Shift Register hinzugefügt

Labels erweitert

Breakout Board/rpi_can.brd

@@ -2738,6 +2738,69 @@ for trimmer refence see : <u>www.electrospec-inc.com/cross_references/trim
 </package>
 </packages>
 </library>
+<library name="74xx-eu">
+<description>&lt;b&gt;TTL Devices, 74xx Series with European Symbols&lt;/b&gt;&lt;p&gt;
+Based on the following sources:
+&lt;ul&gt;
+&lt;li&gt;Texas Instruments &lt;i&gt;TTL Data Book&lt;/i&gt;&amp;nbsp;&amp;nbsp;&amp;nbsp;Volume 1, 1996.
+&lt;li&gt;TTL Data Book, Volume 2 , 1993
+&lt;li&gt;National Seminconductor Databook 1990, ALS/LS Logic
+&lt;li&gt;ttl 74er digital data dictionary, ECA Electronic + Acustic GmbH, ISBN 3-88109-032-0
+&lt;li&gt;http://icmaster.com/ViewCompare.asp
+&lt;/ul&gt;
+&lt;author&gt;Created by librarian@cadsoft.de&lt;/author&gt;</description>
+<packages>
+<package name="SO16">
+<description>&lt;b&gt;Small Outline package&lt;/b&gt; 150 mil</description>
+<wire x1="4.699" y1="1.9558" x2="-4.699" y2="1.9558" width="0.1524" layer="51"/>
+<wire x1="4.699" y1="-1.9558" x2="5.08" y2="-1.5748" width="0.1524" layer="21" curve="90"/>
+<wire x1="-5.08" y1="1.5748" x2="-4.699" y2="1.9558" width="0.1524" layer="21" curve="-90"/>
+<wire x1="4.699" y1="1.9558" x2="5.08" y2="1.5748" width="0.1524" layer="21" curve="-90"/>
+<wire x1="-5.08" y1="-1.5748" x2="-4.699" y2="-1.9558" width="0.1524" layer="21" curve="90"/>
+<wire x1="-4.699" y1="-1.9558" x2="4.699" y2="-1.9558" width="0.1524" layer="51"/>
+<wire x1="5.08" y1="-1.5748" x2="5.08" y2="1.5748" width="0.1524" layer="21"/>
+<wire x1="-5.08" y1="1.5748" x2="-5.08" y2="0.508" width="0.1524" layer="21"/>
+<wire x1="-5.08" y1="0.508" x2="-5.08" y2="-0.508" width="0.1524" layer="21"/>
+<wire x1="-5.08" y1="-0.508" x2="-5.08" y2="-1.5748" width="0.1524" layer="21"/>
+<wire x1="-5.08" y1="0.508" x2="-5.08" y2="-0.508" width="0.1524" layer="21" curve="-180"/>
+<wire x1="-5.08" y1="-1.6002" x2="5.08" y2="-1.6002" width="0.0508" layer="21"/>
+<smd name="1" x="-4.445" y="-3.0734" dx="0.6604" dy="2.032" layer="1"/>
+<smd name="16" x="-4.445" y="3.0734" dx="0.6604" dy="2.032" layer="1"/>
+<smd name="2" x="-3.175" y="-3.0734" dx="0.6604" dy="2.032" layer="1"/>
+<smd name="3" x="-1.905" y="-3.0734" dx="0.6604" dy="2.032" layer="1"/>
+<smd name="15" x="-3.175" y="3.0734" dx="0.6604" dy="2.032" layer="1"/>
+<smd name="14" x="-1.905" y="3.0734" dx="0.6604" dy="2.032" layer="1"/>
+<smd name="4" x="-0.635" y="-3.0734" dx="0.6604" dy="2.032" layer="1"/>
+<smd name="13" x="-0.635" y="3.0734" dx="0.6604" dy="2.032" layer="1"/>
+<smd name="5" x="0.635" y="-3.0734" dx="0.6604" dy="2.032" layer="1"/>
+<smd name="12" x="0.635" y="3.0734" dx="0.6604" dy="2.032" layer="1"/>
+<smd name="6" x="1.905" y="-3.0734" dx="0.6604" dy="2.032" layer="1"/>
+<smd name="7" x="3.175" y="-3.0734" dx="0.6604" dy="2.032" layer="1"/>
+<smd name="11" x="1.905" y="3.0734" dx="0.6604" dy="2.032" layer="1"/>
+<smd name="10" x="3.175" y="3.0734" dx="0.6604" dy="2.032" layer="1"/>
+<smd name="8" x="4.445" y="-3.0734" dx="0.6604" dy="2.032" layer="1"/>
+<smd name="9" x="4.445" y="3.0734" dx="0.6604" dy="2.032" layer="1"/>
+<text x="-3.81" y="-0.762" size="1.27" layer="27" ratio="10">&gt;VALUE</text>
+<text x="-5.461" y="-1.905" size="1.27" layer="25" ratio="10" rot="R90">&gt;NAME</text>
+<rectangle x1="-0.889" y1="1.9558" x2="-0.381" y2="3.0988" layer="51"/>
+<rectangle x1="-4.699" y1="-3.0988" x2="-4.191" y2="-1.9558" layer="51"/>
+<rectangle x1="-3.429" y1="-3.0988" x2="-2.921" y2="-1.9558" layer="51"/>
+<rectangle x1="-2.159" y1="-3.0734" x2="-1.651" y2="-1.9304" layer="51"/>
+<rectangle x1="-0.889" y1="-3.0988" x2="-0.381" y2="-1.9558" layer="51"/>
+<rectangle x1="-2.159" y1="1.9558" x2="-1.651" y2="3.0988" layer="51"/>
+<rectangle x1="-3.429" y1="1.9558" x2="-2.921" y2="3.0988" layer="51"/>
+<rectangle x1="-4.699" y1="1.9558" x2="-4.191" y2="3.0988" layer="51"/>
+<rectangle x1="0.381" y1="-3.0988" x2="0.889" y2="-1.9558" layer="51"/>
+<rectangle x1="1.651" y1="-3.0988" x2="2.159" y2="-1.9558" layer="51"/>
+<rectangle x1="2.921" y1="-3.0988" x2="3.429" y2="-1.9558" layer="51"/>
+<rectangle x1="4.191" y1="-3.0988" x2="4.699" y2="-1.9558" layer="51"/>
+<rectangle x1="0.381" y1="1.9558" x2="0.889" y2="3.0988" layer="51"/>
+<rectangle x1="1.651" y1="1.9558" x2="2.159" y2="3.0988" layer="51"/>
+<rectangle x1="2.921" y1="1.9558" x2="3.429" y2="3.0988" layer="51"/>
+<rectangle x1="4.191" y1="1.9558" x2="4.699" y2="3.0988" layer="51"/>
+</package>
+</packages>
+</library>
 </libraries>
 <attributes>
 </attributes>
@@ -2985,6 +3048,8 @@ design rules under a new name.</description>
 <element name="R8" library="resistor" package="R0805" value="15k" x="2.54" y="-113.03"/>
 <element name="R9" library="rcl" package="PT-10" value="5k" x="-6.35" y="-106.68"/>
 <element name="R10" library="resistor" package="R0805" value="36" x="-8.89" y="-119.38"/>
+<element name="IC1" library="74xx-eu" package="SO16" value="74HC595D" x="-3.81" y="-128.27"/>
+<element name="C2" library="resistor" package="C0805" value="100n" x="-8.89" y="-135.89"/>
 </elements>
 <signals>
 <signal name="+5V">
@@ -3015,15 +3080,21 @@ design rules under a new name.</description>
 <contactref element="R5" pad="2"/>
 <contactref element="R6" pad="2"/>
 <contactref element="R7" pad="2"/>
-<wire x1="6.35" y1="91.44" x2="26.67" y2="91.44" width="0" layer="19" extent="1-1"/>
-<wire x1="3.39" y1="-55.88" x2="6.35" y2="91.44" width="0" layer="19" extent="1-1"/>
-<wire x1="2.54" y1="-62.23" x2="3.39" y2="-55.88" width="0" layer="19" extent="1-1"/>
-<wire x1="3.39" y1="-74.93" x2="2.54" y2="-62.23" width="0" layer="19" extent="1-1"/>
-<wire x1="3.39" y1="-81.28" x2="3.39" y2="-74.93" width="0" layer="19" extent="1-1"/>
-<wire x1="3.39" y1="-87.63" x2="3.39" y2="-81.28" width="0" layer="19" extent="1-1"/>
-<wire x1="3.39" y1="-93.98" x2="3.39" y2="-87.63" width="0" layer="19" extent="1-1"/>
-<wire x1="3.39" y1="-100.33" x2="3.39" y2="-93.98" width="0" layer="19" extent="1-1"/>
-<wire x1="3.39" y1="-106.68" x2="3.39" y2="-100.33" width="0" layer="19" extent="1-1"/>
+<contactref element="TEMP" pad="5"/>
+<contactref element="IC1" pad="16"/>
+<contactref element="C2" pad="1"/>
+<wire x1="-8.255" y1="-125.1966" x2="-9.74" y2="-135.89" width="0" layer="19" extent="1-1"/>
+<wire x1="3.39" y1="-106.68" x2="-8.255" y2="-125.1966" width="0" layer="19" extent="1-1"/>
+<wire x1="3.39" y1="-100.33" x2="3.39" y2="-106.68" width="0" layer="19" extent="1-1"/>
+<wire x1="3.39" y1="-93.98" x2="3.39" y2="-100.33" width="0" layer="19" extent="1-1"/>
+<wire x1="3.39" y1="-87.63" x2="3.39" y2="-93.98" width="0" layer="19" extent="1-1"/>
+<wire x1="3.39" y1="-81.28" x2="3.39" y2="-87.63" width="0" layer="19" extent="1-1"/>
+<wire x1="3.39" y1="-74.93" x2="3.39" y2="-81.28" width="0" layer="19" extent="1-1"/>
+<wire x1="2.54" y1="-62.23" x2="3.39" y2="-74.93" width="0" layer="19" extent="1-1"/>
+<wire x1="3.39" y1="-55.88" x2="2.54" y2="-62.23" width="0" layer="19" extent="1-1"/>
+<wire x1="12.7" y1="-39.37" x2="3.39" y2="-55.88" width="0" layer="19" extent="1-1"/>
+<wire x1="6.35" y1="91.44" x2="12.7" y2="-39.37" width="0" layer="19" extent="1-1"/>
+<wire x1="26.67" y1="91.44" x2="6.35" y2="91.44" width="0" layer="19" extent="1-1"/>
 </signal>
 <signal name="GND">
 <contactref element="SV1" pad="6"/>
@@ -3034,7 +3105,6 @@ design rules under a new name.</description>
 <contactref element="SV1" pad="39"/>
 <contactref element="SV1" pad="25"/>
 <contactref element="SV1" pad="9"/>
-<contactref element="TASTER" pad="1"/>
 <contactref element="FLOWCTRL" pad="1"/>
 <contactref element="C1" pad="2"/>
 <contactref element="D2" pad="A"/>
@@ -3045,6 +3115,11 @@ design rules under a new name.</description>
 <contactref element="DISP" pad="1"/>
 <contactref element="R9" pad="2"/>
 <contactref element="DISP" pad="16"/>
+<contactref element="TEMP" pad="1"/>
+<contactref element="TASTER" pad="1"/>
+<contactref element="IC1" pad="8"/>
+<contactref element="IC1" pad="8"/>
+<contactref element="C2" pad="2"/>
 <wire x1="46.99" y1="93.98" x2="54.61" y2="91.44" width="0" layer="19" extent="1-1"/>
 <wire x1="41.91" y1="93.98" x2="46.99" y2="93.98" width="0" layer="19" extent="1-1"/>
 <wire x1="36.83" y1="91.44" x2="41.91" y2="93.98" width="0" layer="19" extent="1-1"/>
@@ -3057,24 +3132,27 @@ design rules under a new name.</description>
 <wire x1="2.54" y1="-16.51" x2="3.81" y2="-10.16" width="0" layer="19" extent="1-1"/>
 <wire x1="3.81" y1="-22.86" x2="2.54" y2="-16.51" width="0" layer="19" extent="1-1"/>
 <wire x1="2.54" y1="-31.75" x2="3.81" y2="-22.86" width="0" layer="19" extent="1-1"/>
-<wire x1="3.81" y1="-46.99" x2="2.54" y2="-31.75" width="0" layer="19" extent="1-1"/>
+<wire x1="2.54" y1="-39.37" x2="2.54" y2="-31.75" width="0" layer="19" extent="1-1"/>
+<wire x1="3.81" y1="-46.99" x2="2.54" y2="-39.37" width="0" layer="19" extent="1-1"/>
 <wire x1="8.89" y1="-46.99" x2="3.81" y2="-46.99" width="0" layer="19" extent="1-1"/>
 <wire x1="3.39" y1="-52.07" x2="3.81" y2="-46.99" width="0" layer="19" extent="1-1"/>
 <wire x1="20.32" y1="-29.21" x2="3.81" y2="-22.86" width="0" layer="19" extent="1-1"/>
 <wire x1="10.16" y1="-68.58" x2="3.39" y2="-52.07" width="0" layer="19" extent="1-1"/>
 <wire x1="-3.81" y1="-111.76" x2="10.16" y2="-68.58" width="0" layer="19" extent="1-1"/>
+<wire x1="0.635" y1="-131.3434" x2="-3.81" y2="-111.76" width="0" layer="19" extent="1-1"/>
+<wire x1="-8.04" y1="-135.89" x2="0.635" y2="-131.3434" width="0" layer="19" extent="1-1"/>
 </signal>
-<signal name="N$2">
+<signal name="T1">
 <contactref element="TASTER" pad="2"/>
 <contactref element="R7" pad="1"/>
 <wire x1="6.35" y1="-3.81" x2="1.69" y2="-106.68" width="0" layer="19" extent="1-1"/>
 </signal>
-<signal name="N$3">
+<signal name="T2">
 <contactref element="TASTER" pad="3"/>
 <contactref element="R6" pad="1"/>
 <wire x1="8.89" y1="-3.81" x2="1.69" y2="-100.33" width="0" layer="19" extent="1-1"/>
 </signal>
-<signal name="N$1">
+<signal name="FLOW">
 <contactref element="FLOWCTRL" pad="2"/>
 <contactref element="R1" pad="1"/>
 <contactref element="C1" pad="1"/>
@@ -3085,22 +3163,22 @@ design rules under a new name.</description>
 <wire x1="1.69" y1="-52.07" x2="1.69" y2="-55.88" width="0" layer="19" extent="1-1"/>
 <wire x1="6.35" y1="-22.86" x2="1.69" y2="-52.07" width="0" layer="19" extent="1-1"/>
 </signal>
-<signal name="N$4">
+<signal name="PR">
 <contactref element="PRESSO" pad="2"/>
 <contactref element="R2" pad="1"/>
 <wire x1="6.35" y1="-46.99" x2="1.69" y2="-74.93" width="0" layer="19" extent="1-1"/>
 </signal>
-<signal name="N$5">
+<signal name="R1">
 <contactref element="RELAIS2" pad="3"/>
 <contactref element="R3" pad="1"/>
 <wire x1="7.62" y1="-16.51" x2="1.69" y2="-81.28" width="0" layer="19" extent="1-1"/>
 </signal>
-<signal name="N$6">
+<signal name="R2">
 <contactref element="RELAIS2" pad="2"/>
 <contactref element="R4" pad="1"/>
 <wire x1="5.08" y1="-16.51" x2="1.69" y2="-87.63" width="0" layer="19" extent="1-1"/>
 </signal>
-<signal name="N$7">
+<signal name="R3">
 <contactref element="RELAIS1" pad="2"/>
 <contactref element="R5" pad="1"/>
 <wire x1="6.35" y1="-10.16" x2="1.69" y2="-93.98" width="0" layer="19" extent="1-1"/>
@@ -3128,30 +3206,61 @@ design rules under a new name.</description>
 </signal>
 <signal name="D1">
 <contactref element="DISP" pad="8"/>
+<contactref element="IC1" pad="1"/>
+<wire x1="10.16" y1="-29.21" x2="-8.255" y2="-131.3434" width="0" layer="19" extent="1-1"/>
 </signal>
 <signal name="D3">
 <contactref element="DISP" pad="10"/>
+<contactref element="IC1" pad="3"/>
+<wire x1="12.7" y1="-29.21" x2="-5.715" y2="-131.3434" width="0" layer="19" extent="1-1"/>
 </signal>
 <signal name="D5">
 <contactref element="DISP" pad="12"/>
+<contactref element="IC1" pad="5"/>
+<wire x1="15.24" y1="-29.21" x2="-3.175" y2="-131.3434" width="0" layer="19" extent="1-1"/>
 </signal>
 <signal name="D7">
 <contactref element="DISP" pad="14"/>
+<contactref element="IC1" pad="7"/>
+<wire x1="17.78" y1="-29.21" x2="-0.635" y2="-131.3434" width="0" layer="19" extent="1-1"/>
 </signal>
 <signal name="R/W">
 <contactref element="DISP" pad="5"/>
 </signal>
 <signal name="D0">
 <contactref element="DISP" pad="7"/>
+<contactref element="IC1" pad="15"/>
+<wire x1="10.16" y1="-31.75" x2="-6.985" y2="-125.1966" width="0" layer="19" extent="1-1"/>
 </signal>
 <signal name="D2">
 <contactref element="DISP" pad="9"/>
+<contactref element="IC1" pad="2"/>
+<wire x1="12.7" y1="-31.75" x2="-6.985" y2="-131.3434" width="0" layer="19" extent="1-1"/>
 </signal>
 <signal name="D4">
 <contactref element="DISP" pad="11"/>
+<contactref element="IC1" pad="4"/>
+<wire x1="15.24" y1="-31.75" x2="-4.445" y2="-131.3434" width="0" layer="19" extent="1-1"/>
 </signal>
 <signal name="D6">
 <contactref element="DISP" pad="13"/>
+<contactref element="IC1" pad="6"/>
+<wire x1="17.78" y1="-31.75" x2="-1.905" y2="-131.3434" width="0" layer="19" extent="1-1"/>
+</signal>
+<signal name="CS">
+<contactref element="TEMP" pad="4"/>
+<contactref element="SV1" pad="24"/>
+<wire x1="10.16" y1="-39.37" x2="34.29" y2="93.98" width="0" layer="19" extent="1-1"/>
+</signal>
+<signal name="MISO">
+<contactref element="TEMP" pad="3"/>
+<contactref element="SV1" pad="21"/>
+<wire x1="7.62" y1="-39.37" x2="31.75" y2="91.44" width="0" layer="19" extent="1-1"/>
+</signal>
+<signal name="SCK">
+<contactref element="TEMP" pad="2"/>
+<contactref element="SV1" pad="23"/>
+<wire x1="5.08" y1="-39.37" x2="34.29" y2="91.44" width="0" layer="19" extent="1-1"/>
 </signal>
 </signals>
 </board>

Breakout Board/rpi_can.sch

@@ -7473,6 +7473,290 @@ for trimmer refence see : <u>www.electrospec-inc.com/cross_references/trim
 </deviceset>
 </devicesets>
 </library>
+<library name="74xx-eu">
+<description>&lt;b&gt;TTL Devices, 74xx Series with European Symbols&lt;/b&gt;&lt;p&gt;
+Based on the following sources:
+&lt;ul&gt;
+&lt;li&gt;Texas Instruments &lt;i&gt;TTL Data Book&lt;/i&gt;&amp;nbsp;&amp;nbsp;&amp;nbsp;Volume 1, 1996.
+&lt;li&gt;TTL Data Book, Volume 2 , 1993
+&lt;li&gt;National Seminconductor Databook 1990, ALS/LS Logic
+&lt;li&gt;ttl 74er digital data dictionary, ECA Electronic + Acustic GmbH, ISBN 3-88109-032-0
+&lt;li&gt;http://icmaster.com/ViewCompare.asp
+&lt;/ul&gt;
+&lt;author&gt;Created by librarian@cadsoft.de&lt;/author&gt;</description>
+<packages>
+<package name="DIL16">
+<description>&lt;b&gt;Dual In Line Package&lt;/b&gt;</description>
+<wire x1="10.16" y1="2.921" x2="-10.16" y2="2.921" width="0.1524" layer="21"/>
+<wire x1="-10.16" y1="-2.921" x2="10.16" y2="-2.921" width="0.1524" layer="21"/>
+<wire x1="10.16" y1="2.921" x2="10.16" y2="-2.921" width="0.1524" layer="21"/>
+<wire x1="-10.16" y1="2.921" x2="-10.16" y2="1.016" width="0.1524" layer="21"/>
+<wire x1="-10.16" y1="-2.921" x2="-10.16" y2="-1.016" width="0.1524" layer="21"/>
+<wire x1="-10.16" y1="1.016" x2="-10.16" y2="-1.016" width="0.1524" layer="21" curve="-180"/>
+<pad name="1" x="-8.89" y="-3.81" drill="0.8128" shape="long" rot="R90"/>
+<pad name="2" x="-6.35" y="-3.81" drill="0.8128" shape="long" rot="R90"/>
+<pad name="7" x="6.35" y="-3.81" drill="0.8128" shape="long" rot="R90"/>
+<pad name="8" x="8.89" y="-3.81" drill="0.8128" shape="long" rot="R90"/>
+<pad name="3" x="-3.81" y="-3.81" drill="0.8128" shape="long" rot="R90"/>
+<pad name="4" x="-1.27" y="-3.81" drill="0.8128" shape="long" rot="R90"/>
+<pad name="6" x="3.81" y="-3.81" drill="0.8128" shape="long" rot="R90"/>
+<pad name="5" x="1.27" y="-3.81" drill="0.8128" shape="long" rot="R90"/>
+<pad name="9" x="8.89" y="3.81" drill="0.8128" shape="long" rot="R90"/>
+<pad name="10" x="6.35" y="3.81" drill="0.8128" shape="long" rot="R90"/>
+<pad name="11" x="3.81" y="3.81" drill="0.8128" shape="long" rot="R90"/>
+<pad name="12" x="1.27" y="3.81" drill="0.8128" shape="long" rot="R90"/>
+<pad name="13" x="-1.27" y="3.81" drill="0.8128" shape="long" rot="R90"/>
+<pad name="14" x="-3.81" y="3.81" drill="0.8128" shape="long" rot="R90"/>
+<pad name="15" x="-6.35" y="3.81" drill="0.8128" shape="long" rot="R90"/>
+<pad name="16" x="-8.89" y="3.81" drill="0.8128" shape="long" rot="R90"/>
+<text x="-10.541" y="-2.921" size="1.27" layer="25" ratio="10" rot="R90">&gt;NAME</text>
+<text x="-7.493" y="-0.635" size="1.27" layer="27" ratio="10">&gt;VALUE</text>
+</package>
+<package name="SO16">
+<description>&lt;b&gt;Small Outline package&lt;/b&gt; 150 mil</description>
+<wire x1="4.699" y1="1.9558" x2="-4.699" y2="1.9558" width="0.1524" layer="51"/>
+<wire x1="4.699" y1="-1.9558" x2="5.08" y2="-1.5748" width="0.1524" layer="21" curve="90"/>
+<wire x1="-5.08" y1="1.5748" x2="-4.699" y2="1.9558" width="0.1524" layer="21" curve="-90"/>
+<wire x1="4.699" y1="1.9558" x2="5.08" y2="1.5748" width="0.1524" layer="21" curve="-90"/>
+<wire x1="-5.08" y1="-1.5748" x2="-4.699" y2="-1.9558" width="0.1524" layer="21" curve="90"/>
+<wire x1="-4.699" y1="-1.9558" x2="4.699" y2="-1.9558" width="0.1524" layer="51"/>
+<wire x1="5.08" y1="-1.5748" x2="5.08" y2="1.5748" width="0.1524" layer="21"/>
+<wire x1="-5.08" y1="1.5748" x2="-5.08" y2="0.508" width="0.1524" layer="21"/>
+<wire x1="-5.08" y1="0.508" x2="-5.08" y2="-0.508" width="0.1524" layer="21"/>
+<wire x1="-5.08" y1="-0.508" x2="-5.08" y2="-1.5748" width="0.1524" layer="21"/>
+<wire x1="-5.08" y1="0.508" x2="-5.08" y2="-0.508" width="0.1524" layer="21" curve="-180"/>
+<wire x1="-5.08" y1="-1.6002" x2="5.08" y2="-1.6002" width="0.0508" layer="21"/>
+<smd name="1" x="-4.445" y="-3.0734" dx="0.6604" dy="2.032" layer="1"/>
+<smd name="16" x="-4.445" y="3.0734" dx="0.6604" dy="2.032" layer="1"/>
+<smd name="2" x="-3.175" y="-3.0734" dx="0.6604" dy="2.032" layer="1"/>
+<smd name="3" x="-1.905" y="-3.0734" dx="0.6604" dy="2.032" layer="1"/>
+<smd name="15" x="-3.175" y="3.0734" dx="0.6604" dy="2.032" layer="1"/>
+<smd name="14" x="-1.905" y="3.0734" dx="0.6604" dy="2.032" layer="1"/>
+<smd name="4" x="-0.635" y="-3.0734" dx="0.6604" dy="2.032" layer="1"/>
+<smd name="13" x="-0.635" y="3.0734" dx="0.6604" dy="2.032" layer="1"/>
+<smd name="5" x="0.635" y="-3.0734" dx="0.6604" dy="2.032" layer="1"/>
+<smd name="12" x="0.635" y="3.0734" dx="0.6604" dy="2.032" layer="1"/>
+<smd name="6" x="1.905" y="-3.0734" dx="0.6604" dy="2.032" layer="1"/>
+<smd name="7" x="3.175" y="-3.0734" dx="0.6604" dy="2.032" layer="1"/>
+<smd name="11" x="1.905" y="3.0734" dx="0.6604" dy="2.032" layer="1"/>
+<smd name="10" x="3.175" y="3.0734" dx="0.6604" dy="2.032" layer="1"/>
+<smd name="8" x="4.445" y="-3.0734" dx="0.6604" dy="2.032" layer="1"/>
+<smd name="9" x="4.445" y="3.0734" dx="0.6604" dy="2.032" layer="1"/>
+<text x="-3.81" y="-0.762" size="1.27" layer="27" ratio="10">&gt;VALUE</text>
+<text x="-5.461" y="-1.905" size="1.27" layer="25" ratio="10" rot="R90">&gt;NAME</text>
+<rectangle x1="-0.889" y1="1.9558" x2="-0.381" y2="3.0988" layer="51"/>
+<rectangle x1="-4.699" y1="-3.0988" x2="-4.191" y2="-1.9558" layer="51"/>
+<rectangle x1="-3.429" y1="-3.0988" x2="-2.921" y2="-1.9558" layer="51"/>
+<rectangle x1="-2.159" y1="-3.0734" x2="-1.651" y2="-1.9304" layer="51"/>
+<rectangle x1="-0.889" y1="-3.0988" x2="-0.381" y2="-1.9558" layer="51"/>
+<rectangle x1="-2.159" y1="1.9558" x2="-1.651" y2="3.0988" layer="51"/>
+<rectangle x1="-3.429" y1="1.9558" x2="-2.921" y2="3.0988" layer="51"/>
+<rectangle x1="-4.699" y1="1.9558" x2="-4.191" y2="3.0988" layer="51"/>
+<rectangle x1="0.381" y1="-3.0988" x2="0.889" y2="-1.9558" layer="51"/>
+<rectangle x1="1.651" y1="-3.0988" x2="2.159" y2="-1.9558" layer="51"/>
+<rectangle x1="2.921" y1="-3.0988" x2="3.429" y2="-1.9558" layer="51"/>
+<rectangle x1="4.191" y1="-3.0988" x2="4.699" y2="-1.9558" layer="51"/>
+<rectangle x1="0.381" y1="1.9558" x2="0.889" y2="3.0988" layer="51"/>
+<rectangle x1="1.651" y1="1.9558" x2="2.159" y2="3.0988" layer="51"/>
+<rectangle x1="2.921" y1="1.9558" x2="3.429" y2="3.0988" layer="51"/>
+<rectangle x1="4.191" y1="1.9558" x2="4.699" y2="3.0988" layer="51"/>
+</package>
+<package name="LCC20">
+<description>&lt;b&gt;Leadless Chip Carrier&lt;/b&gt;&lt;p&gt; Ceramic Package</description>
+<wire x1="-0.4001" y1="4.4" x2="-0.87" y2="4.4" width="0.2032" layer="51"/>
+<wire x1="-3.3" y1="4.4" x2="-4.4" y2="3.3" width="0.2032" layer="51"/>
+<wire x1="-0.4001" y1="4.3985" x2="0.4001" y2="4.3985" width="0.2032" layer="51" curve="180"/>
+<wire x1="-1.6701" y1="4.3985" x2="-0.8699" y2="4.3985" width="0.2032" layer="51" curve="180"/>
+<wire x1="-4.3985" y1="2.14" x2="-4.3985" y2="2.94" width="0.2032" layer="51" curve="180"/>
+<wire x1="-2.9401" y1="4.4" x2="-3.3" y2="4.4" width="0.2032" layer="51"/>
+<wire x1="0.87" y1="4.4" x2="0.4001" y2="4.4" width="0.2032" layer="51"/>
+<wire x1="0.87" y1="4.3985" x2="1.67" y2="4.3985" width="0.2032" layer="51" curve="180"/>
+<wire x1="-4.4" y1="3.3" x2="-4.4" y2="2.9401" width="0.2032" layer="51"/>
+<wire x1="-4.4" y1="2.14" x2="-4.4" y2="1.6701" width="0.2032" layer="51"/>
+<wire x1="-4.3985" y1="0.87" x2="-4.3985" y2="1.67" width="0.2032" layer="51" curve="180"/>
+<wire x1="-4.3985" y1="-0.4001" x2="-4.3985" y2="0.4001" width="0.2032" layer="51" curve="180"/>
+<wire x1="-4.3985" y1="-1.6701" x2="-4.3985" y2="-0.8699" width="0.2032" layer="51" curve="180"/>
+<wire x1="-4.4" y1="0.87" x2="-4.4" y2="0.4001" width="0.2032" layer="51"/>
+<wire x1="-4.4" y1="-0.4001" x2="-4.4" y2="-0.87" width="0.2032" layer="51"/>
+<wire x1="-4.4" y1="-2.9401" x2="-4.4" y2="-4.4" width="0.2032" layer="51"/>
+<wire x1="-4.4" y1="-4.4" x2="-4.4" y2="-4.4099" width="0.2032" layer="51"/>
+<wire x1="2.14" y1="4.3985" x2="2.94" y2="4.3985" width="0.2032" layer="51" curve="180"/>
+<wire x1="2.14" y1="4.4" x2="1.6701" y2="4.4" width="0.2032" layer="51"/>
+<wire x1="4.4" y1="4.4" x2="2.9401" y2="4.4" width="0.2032" layer="51"/>
+<wire x1="0.4001" y1="-4.4" x2="0.87" y2="-4.4" width="0.2032" layer="51"/>
+<wire x1="-0.4001" y1="-4.3985" x2="0.4001" y2="-4.3985" width="0.2032" layer="51" curve="-180"/>
+<wire x1="0.87" y1="-4.3985" x2="1.67" y2="-4.3985" width="0.2032" layer="51" curve="-180"/>
+<wire x1="2.9401" y1="-4.4" x2="4.4" y2="-4.4" width="0.2032" layer="51"/>
+<wire x1="-0.87" y1="-4.4" x2="-0.4001" y2="-4.4" width="0.2032" layer="51"/>
+<wire x1="-1.6701" y1="-4.3985" x2="-0.8699" y2="-4.3985" width="0.2032" layer="51" curve="-180"/>
+<wire x1="-2.9401" y1="-4.3985" x2="-2.1399" y2="-4.3985" width="0.2032" layer="51" curve="-180"/>
+<wire x1="-2.14" y1="-4.4" x2="-1.6701" y2="-4.4" width="0.2032" layer="51"/>
+<wire x1="-4.4" y1="-4.4" x2="-2.9401" y2="-4.4" width="0.2032" layer="51"/>
+<wire x1="4.4" y1="0.4001" x2="4.4" y2="0.87" width="0.2032" layer="51"/>
+<wire x1="4.3985" y1="0.4001" x2="4.3985" y2="-0.4001" width="0.2032" layer="51" curve="180"/>
+<wire x1="4.3985" y1="1.6701" x2="4.3985" y2="0.8699" width="0.2032" layer="51" curve="180"/>
+<wire x1="4.4" y1="2.9401" x2="4.4" y2="4.4" width="0.2032" layer="51"/>
+<wire x1="4.4" y1="-0.87" x2="4.4" y2="-0.4001" width="0.2032" layer="51"/>
+<wire x1="4.3985" y1="-0.87" x2="4.3985" y2="-1.67" width="0.2032" layer="51" curve="180"/>
+<wire x1="4.3985" y1="-2.14" x2="4.3985" y2="-2.94" width="0.2032" layer="51" curve="180"/>
+<wire x1="4.4" y1="-2.14" x2="4.4" y2="-1.6701" width="0.2032" layer="51"/>
+<wire x1="4.4" y1="-4.4" x2="4.4" y2="-2.9401" width="0.2032" layer="51"/>
+<wire x1="-2.9401" y1="4.3985" x2="-2.1399" y2="4.3985" width="0.2032" layer="51" curve="180"/>
+<wire x1="-1.6701" y1="4.4" x2="-2.14" y2="4.4" width="0.2032" layer="51"/>
+<wire x1="-4.3985" y1="-2.9401" x2="-4.3985" y2="-2.1399" width="0.2032" layer="51" curve="180"/>
+<wire x1="-4.4" y1="-1.6701" x2="-4.4" y2="-2.14" width="0.2032" layer="51"/>
+<wire x1="1.6701" y1="-4.4" x2="2.14" y2="-4.4" width="0.2032" layer="51"/>
+<wire x1="2.14" y1="-4.3985" x2="2.94" y2="-4.3985" width="0.2032" layer="51" curve="-180"/>
+<wire x1="4.3985" y1="2.9401" x2="4.3985" y2="2.1399" width="0.2032" layer="51" curve="180"/>
+<wire x1="4.4" y1="1.6701" x2="4.4" y2="2.14" width="0.2032" layer="51"/>
+<wire x1="-3.3" y1="4.4" x2="-4.4" y2="3.3" width="0.2032" layer="21"/>
+<wire x1="-4.4" y1="-3.1941" x2="-4.4" y2="-4.4" width="0.2032" layer="21"/>
+<wire x1="-4.4" y1="-4.4" x2="-3.1941" y2="-4.4" width="0.2032" layer="21"/>
+<wire x1="3.1941" y1="-4.4" x2="4.4" y2="-4.4" width="0.2032" layer="21"/>
+<wire x1="4.4" y1="-4.4" x2="4.4" y2="-3.1941" width="0.2032" layer="21"/>
+<wire x1="4.4" y1="3.1941" x2="4.4" y2="4.4" width="0.2032" layer="21"/>
+<wire x1="4.4" y1="4.4" x2="3.1941" y2="4.4" width="0.2032" layer="21"/>
+<smd name="2" x="-1.27" y="4.5001" dx="0.8" dy="2" layer="1"/>
+<smd name="1" x="0" y="3.8001" dx="0.8" dy="3.4" layer="1"/>
+<smd name="3" x="-2.54" y="4.5001" dx="0.8" dy="2" layer="1"/>
+<smd name="4" x="-4.5001" y="2.54" dx="2" dy="0.8" layer="1"/>
+<smd name="5" x="-4.5001" y="1.27" dx="2" dy="0.8" layer="1"/>
+<smd name="6" x="-4.5001" y="0" dx="2" dy="0.8" layer="1"/>
+<smd name="7" x="-4.5001" y="-1.27" dx="2" dy="0.8" layer="1"/>
+<smd name="8" x="-4.5001" y="-2.54" dx="2" dy="0.8" layer="1"/>
+<smd name="9" x="-2.54" y="-4.5001" dx="0.8" dy="2" layer="1"/>
+<smd name="10" x="-1.27" y="-4.5001" dx="0.8" dy="2" layer="1"/>
+<smd name="11" x="0" y="-4.5001" dx="0.8" dy="2" layer="1"/>
+<smd name="12" x="1.27" y="-4.5001" dx="0.8" dy="2" layer="1"/>
+<smd name="13" x="2.54" y="-4.5001" dx="0.8" dy="2" layer="1"/>
+<smd name="14" x="4.5001" y="-2.54" dx="2" dy="0.8" layer="1"/>
+<smd name="15" x="4.5001" y="-1.27" dx="2" dy="0.8" layer="1"/>
+<smd name="16" x="4.5001" y="0" dx="2" dy="0.8" layer="1"/>
+<smd name="17" x="4.5001" y="1.27" dx="2" dy="0.8" layer="1"/>
+<smd name="18" x="4.5001" y="2.54" dx="2" dy="0.8" layer="1"/>
+<smd name="19" x="2.54" y="4.5001" dx="0.8" dy="2" layer="1"/>
+<smd name="20" x="1.27" y="4.5001" dx="0.8" dy="2" layer="1"/>
+<text x="-4.0051" y="6.065" size="1.778" layer="25">&gt;NAME</text>
+<text x="-3.9751" y="-7.5601" size="1.778" layer="27">&gt;VALUE</text>
+</package>
+</packages>
+<symbols>
+<symbol name="74595">
+<wire x1="-7.62" y1="-15.24" x2="7.62" y2="-15.24" width="0.4064" layer="94"/>
+<wire x1="7.62" y1="-15.24" x2="7.62" y2="12.7" width="0.4064" layer="94"/>
+<wire x1="7.62" y1="12.7" x2="-7.62" y2="12.7" width="0.4064" layer="94"/>
+<wire x1="-7.62" y1="12.7" x2="-7.62" y2="-15.24" width="0.4064" layer="94"/>
+<text x="-7.62" y="13.335" size="1.778" layer="95" font="vector">&gt;NAME</text>
+<text x="-7.62" y="-17.78" size="1.778" layer="96">&gt;VALUE</text>
+<pin name="QB" x="12.7" y="7.62" length="middle" direction="hiz" rot="R180"/>
+<pin name="QC" x="12.7" y="5.08" length="middle" direction="hiz" rot="R180"/>
+<pin name="QD" x="12.7" y="2.54" length="middle" direction="hiz" rot="R180"/>
+<pin name="QE" x="12.7" y="0" length="middle" direction="hiz" rot="R180"/>
+<pin name="QF" x="12.7" y="-2.54" length="middle" direction="hiz" rot="R180"/>
+<pin name="QG" x="12.7" y="-5.08" length="middle" direction="hiz" rot="R180"/>
+<pin name="QH" x="12.7" y="-7.62" length="middle" direction="hiz" rot="R180"/>
+<pin name="SCL" x="-12.7" y="2.54" length="middle" direction="in" function="dot"/>
+<pin name="SCK" x="-12.7" y="5.08" length="middle" direction="in" function="clk"/>
+<pin name="RCK" x="-12.7" y="-2.54" length="middle" direction="in" function="clk"/>
+<pin name="G" x="-12.7" y="-12.7" length="middle" direction="in" function="dot"/>
+<pin name="SER" x="-12.7" y="10.16" length="middle" direction="in"/>
+<pin name="QA" x="12.7" y="10.16" length="middle" direction="hiz" rot="R180"/>
+<pin name="QH*" x="12.7" y="-12.7" length="middle" direction="hiz" rot="R180"/>
+</symbol>
+<symbol name="PWRN">
+<text x="-0.635" y="-0.635" size="1.778" layer="95">&gt;NAME</text>
+<text x="1.905" y="-5.842" size="1.27" layer="95" rot="R90">GND</text>
+<text x="1.905" y="2.54" size="1.27" layer="95" rot="R90">VCC</text>
+<pin name="GND" x="0" y="-7.62" visible="pad" length="middle" direction="pwr" rot="R90"/>
+<pin name="VCC" x="0" y="7.62" visible="pad" length="middle" direction="pwr" rot="R270"/>
+</symbol>
+</symbols>
+<devicesets>
+<deviceset name="74*595" prefix="IC">
+<description>8-bit &lt;b&gt;SHIFT REGISTER&lt;/b&gt;, output latch</description>
+<gates>
+<gate name="A" symbol="74595" x="22.86" y="0"/>
+<gate name="P" symbol="PWRN" x="-5.08" y="0" addlevel="request"/>
+</gates>
+<devices>
+<device name="N" package="DIL16">
+<connects>
+<connect gate="A" pin="G" pad="13"/>
+<connect gate="A" pin="QA" pad="15"/>
+<connect gate="A" pin="QB" pad="1"/>
+<connect gate="A" pin="QC" pad="2"/>
+<connect gate="A" pin="QD" pad="3"/>
+<connect gate="A" pin="QE" pad="4"/>
+<connect gate="A" pin="QF" pad="5"/>
+<connect gate="A" pin="QG" pad="6"/>
+<connect gate="A" pin="QH" pad="7"/>
+<connect gate="A" pin="QH*" pad="9"/>
+<connect gate="A" pin="RCK" pad="12"/>
+<connect gate="A" pin="SCK" pad="11"/>
+<connect gate="A" pin="SCL" pad="10"/>
+<connect gate="A" pin="SER" pad="14"/>
+<connect gate="P" pin="GND" pad="8"/>
+<connect gate="P" pin="VCC" pad="16"/>
+</connects>
+<technologies>
+<technology name="HC"/>
+<technology name="HCT"/>
+<technology name="LS"/>
+</technologies>
+</device>
+<device name="D" package="SO16">
+<connects>
+<connect gate="A" pin="G" pad="13"/>
+<connect gate="A" pin="QA" pad="15"/>
+<connect gate="A" pin="QB" pad="1"/>
+<connect gate="A" pin="QC" pad="2"/>
+<connect gate="A" pin="QD" pad="3"/>
+<connect gate="A" pin="QE" pad="4"/>
+<connect gate="A" pin="QF" pad="5"/>
+<connect gate="A" pin="QG" pad="6"/>
+<connect gate="A" pin="QH" pad="7"/>
+<connect gate="A" pin="QH*" pad="9"/>
+<connect gate="A" pin="RCK" pad="12"/>
+<connect gate="A" pin="SCK" pad="11"/>
+<connect gate="A" pin="SCL" pad="10"/>
+<connect gate="A" pin="SER" pad="14"/>
+<connect gate="P" pin="GND" pad="8"/>
+<connect gate="P" pin="VCC" pad="16"/>
+</connects>
+<technologies>
+<technology name="HC"/>
+<technology name="HCT"/>
+</technologies>
+</device>
+<device name="FK" package="LCC20">
+<connects>
+<connect gate="A" pin="G" pad="17"/>
+<connect gate="A" pin="QA" pad="19"/>
+<connect gate="A" pin="QB" pad="2"/>
+<connect gate="A" pin="QC" pad="3"/>
+<connect gate="A" pin="QD" pad="4"/>
+<connect gate="A" pin="QE" pad="5"/>
+<connect gate="A" pin="QF" pad="7"/>
+<connect gate="A" pin="QG" pad="8"/>
+<connect gate="A" pin="QH" pad="9"/>
+<connect gate="A" pin="QH*" pad="12"/>
+<connect gate="A" pin="RCK" pad="15"/>
+<connect gate="A" pin="SCK" pad="14"/>
+<connect gate="A" pin="SCL" pad="13"/>
+<connect gate="A" pin="SER" pad="18"/>
+<connect gate="P" pin="GND" pad="10"/>
+<connect gate="P" pin="VCC" pad="20"/>
+</connects>
+<technologies>
+<technology name="HC"/>
+<technology name="HCT"/>
+<technology name="LS"/>
+</technologies>
+</device>
+</devices>
+</deviceset>
+</devicesets>
+</library>
 </libraries>
 <attributes>
 </attributes>
@@ -7525,6 +7809,13 @@ for trimmer refence see : &lt;u&gt;www.electrospec-inc.com/cross_references/trim
 <part name="GND7" library="supply1" deviceset="GND" device=""/>
 <part name="P+6" library="supply1" deviceset="+5V" device=""/>
 <part name="R10" library="resistor" deviceset="R-EU_" device="R0805" value="36"/>
+<part name="GND8" library="supply1" deviceset="GND" device=""/>
+<part name="+3V9" library="supply1" deviceset="+3V3" device=""/>
+<part name="GND9" library="supply1" deviceset="GND" device=""/>
+<part name="IC1" library="74xx-eu" deviceset="74*595" device="D" technology="HC"/>
+<part name="GND10" library="supply1" deviceset="GND" device=""/>
+<part name="+3V10" library="supply1" deviceset="+3V3" device=""/>
+<part name="C2" library="resistor" deviceset="C-EU" device="C0805" value="100n"/>
 </parts>
 <sheets>
 <sheet>
@@ -7538,9 +7829,9 @@ for trimmer refence see : &lt;u&gt;www.electrospec-inc.com/cross_references/trim
 <wire x1="170.18" y1="129.54" x2="76.2" y2="129.54" width="0.1524" layer="97" style="longdash"/>
 <text x="78.74" y="121.92" size="5.08" layer="97">INPUT</text>
 <text x="172.72" y="121.92" size="5.08" layer="97">OUTPUT</text>
-<wire x1="170.18" y1="0" x2="261.62" y2="0" width="0.1524" layer="97" style="longdash"/>
-<wire x1="261.62" y1="0" x2="261.62" y2="129.54" width="0.1524" layer="97" style="longdash"/>
-<wire x1="261.62" y1="129.54" x2="170.18" y2="129.54" width="0.1524" layer="97" style="longdash"/>
+<wire x1="170.18" y1="0" x2="370.84" y2="0" width="0.1524" layer="97" style="longdash"/>
+<wire x1="370.84" y1="0" x2="370.84" y2="129.54" width="0.1524" layer="97" style="longdash"/>
+<wire x1="370.84" y1="129.54" x2="170.18" y2="129.54" width="0.1524" layer="97" style="longdash"/>
 <text x="2.54" y="121.92" size="5.08" layer="97">RPi</text>
 </plain>
 <instances>
@@ -7549,10 +7840,10 @@ for trimmer refence see : &lt;u&gt;www.electrospec-inc.com/cross_references/trim
 <instance part="GND1" gate="1" x="38.1" y="30.48"/>
 <instance part="P+1" gate="1" x="25.4" y="99.06"/>
 <instance part="TASTER" gate="G$1" x="93.98" y="106.68"/>
-<instance part="RELAIS1" gate="G$1" x="190.5" y="12.7"/>
-<instance part="RELAIS2" gate="1" x="190.5" y="43.18"/>
+<instance part="RELAIS1" gate="G$1" x="238.76" y="12.7"/>
+<instance part="RELAIS2" gate="1" x="238.76" y="43.18"/>
 <instance part="FLOWCTRL" gate="G$1" x="93.98" y="76.2"/>
-<instance part="DISP" gate="G$1" x="200.66" y="93.98"/>
+<instance part="DISP" gate="G$1" x="248.92" y="93.98"/>
 <instance part="TEMP" gate="G$1" x="93.98" y="12.7"/>
 <instance part="PRESSO" gate="G$1" x="93.98" y="38.1"/>
 <instance part="P+2" gate="1" x="114.3" y="83.82"/>
@@ -7562,30 +7853,38 @@ for trimmer refence see : &lt;u&gt;www.electrospec-inc.com/cross_references/trim
 <instance part="D1" gate="G$1" x="132.08" y="81.28" rot="R90"/>
 <instance part="D2" gate="G$1" x="132.08" y="71.12" rot="R90"/>
 <instance part="+3V2" gate="G$1" x="127" y="96.52"/>
-<instance part="P+3" gate="1" x="210.82" y="20.32"/>
-<instance part="P+4" gate="1" x="210.82" y="50.8"/>
-<instance part="GND3" gate="1" x="210.82" y="33.02"/>
-<instance part="GND4" gate="1" x="210.82" y="5.08"/>
+<instance part="P+3" gate="1" x="259.08" y="20.32"/>
+<instance part="P+4" gate="1" x="259.08" y="50.8"/>
+<instance part="GND3" gate="1" x="259.08" y="33.02"/>
+<instance part="GND4" gate="1" x="259.08" y="5.08"/>
 <instance part="GND5" gate="1" x="106.68" y="30.48"/>
 <instance part="R2" gate="G$1" x="109.22" y="45.72" rot="R90"/>
 <instance part="+3V3" gate="G$1" x="109.22" y="53.34"/>
-<instance part="R3" gate="G$1" x="218.44" y="53.34" rot="R90"/>
-<instance part="R4" gate="G$1" x="226.06" y="53.34" rot="R90"/>
-<instance part="R5" gate="G$1" x="218.44" y="20.32" rot="R90"/>
-<instance part="+3V4" gate="G$1" x="218.44" y="63.5"/>
-<instance part="+3V5" gate="G$1" x="226.06" y="63.5"/>
-<instance part="+3V6" gate="G$1" x="218.44" y="27.94"/>
+<instance part="R3" gate="G$1" x="266.7" y="53.34" rot="R90"/>
+<instance part="R4" gate="G$1" x="274.32" y="53.34" rot="R90"/>
+<instance part="R5" gate="G$1" x="266.7" y="20.32" rot="R90"/>
+<instance part="+3V4" gate="G$1" x="266.7" y="63.5"/>
+<instance part="+3V5" gate="G$1" x="274.32" y="63.5"/>
+<instance part="+3V6" gate="G$1" x="266.7" y="27.94"/>
 <instance part="R6" gate="G$1" x="109.22" y="116.84" rot="R90"/>
 <instance part="+3V7" gate="G$1" x="109.22" y="124.46"/>
 <instance part="R7" gate="G$1" x="116.84" y="116.84" rot="R90"/>
 <instance part="+3V8" gate="G$1" x="116.84" y="124.46"/>
-<instance part="GND6" gate="1" x="210.82" y="76.2"/>
-<instance part="P+5" gate="1" x="187.96" y="119.38"/>
-<instance part="R8" gate="G$1" x="233.68" y="101.6" rot="R90"/>
-<instance part="R9" gate="1" x="233.68" y="88.9" rot="R270"/>
-<instance part="GND7" gate="1" x="233.68" y="78.74"/>
-<instance part="P+6" gate="1" x="233.68" y="111.76"/>
-<instance part="R10" gate="G$1" x="213.36" y="109.22" rot="R90"/>
+<instance part="GND6" gate="1" x="259.08" y="76.2"/>
+<instance part="P+5" gate="1" x="236.22" y="121.92"/>
+<instance part="R8" gate="G$1" x="281.94" y="101.6" rot="R90"/>
+<instance part="R9" gate="1" x="281.94" y="88.9" rot="R270"/>
+<instance part="GND7" gate="1" x="281.94" y="78.74"/>
+<instance part="P+6" gate="1" x="281.94" y="111.76"/>
+<instance part="R10" gate="G$1" x="261.62" y="109.22" rot="R90"/>
+<instance part="GND8" gate="1" x="104.14" y="5.08"/>
+<instance part="+3V9" gate="G$1" x="104.14" y="25.4"/>
+<instance part="GND9" gate="1" x="104.14" y="99.06"/>
+<instance part="IC1" gate="A" x="195.58" y="99.06"/>
+<instance part="IC1" gate="P" x="195.58" y="63.5"/>
+<instance part="GND10" gate="1" x="195.58" y="50.8"/>
+<instance part="+3V10" gate="G$1" x="195.58" y="76.2"/>
+<instance part="C2" gate="G$1" x="205.74" y="66.04"/>
 </instances>
 <busses>
 </busses>
@@ -7610,29 +7909,29 @@ for trimmer refence see : &lt;u&gt;www.electrospec-inc.com/cross_references/trim
 <segment>
 <pinref part="RELAIS1" gate="G$1" pin="3"/>
 <pinref part="P+3" gate="1" pin="+5V"/>
-<wire x1="198.12" y1="15.24" x2="210.82" y2="15.24" width="0.1524" layer="91"/>
-<wire x1="210.82" y1="15.24" x2="210.82" y2="17.78" width="0.1524" layer="91"/>
+<wire x1="246.38" y1="15.24" x2="259.08" y2="15.24" width="0.1524" layer="91"/>
+<wire x1="259.08" y1="15.24" x2="259.08" y2="17.78" width="0.1524" layer="91"/>
 </segment>
 <segment>
 <pinref part="RELAIS2" gate="1" pin="4"/>
 <pinref part="P+4" gate="1" pin="+5V"/>
-<wire x1="198.12" y1="45.72" x2="210.82" y2="45.72" width="0.1524" layer="91"/>
-<wire x1="210.82" y1="45.72" x2="210.82" y2="48.26" width="0.1524" layer="91"/>
+<wire x1="246.38" y1="45.72" x2="259.08" y2="45.72" width="0.1524" layer="91"/>
+<wire x1="259.08" y1="45.72" x2="259.08" y2="48.26" width="0.1524" layer="91"/>
 </segment>
 <segment>
 <pinref part="DISP" gate="G$1" pin="2"/>
 <pinref part="P+5" gate="1" pin="+5V"/>
-<wire x1="193.04" y1="86.36" x2="187.96" y2="86.36" width="0.1524" layer="91"/>
-<wire x1="187.96" y1="86.36" x2="187.96" y2="114.3" width="0.1524" layer="91"/>
+<wire x1="241.3" y1="86.36" x2="236.22" y2="86.36" width="0.1524" layer="91"/>
+<wire x1="236.22" y1="86.36" x2="236.22" y2="114.3" width="0.1524" layer="91"/>
 <pinref part="R10" gate="G$1" pin="2"/>
-<wire x1="187.96" y1="114.3" x2="187.96" y2="116.84" width="0.1524" layer="91"/>
-<wire x1="213.36" y1="114.3" x2="187.96" y2="114.3" width="0.1524" layer="91"/>
-<junction x="187.96" y="114.3"/>
+<wire x1="236.22" y1="114.3" x2="236.22" y2="119.38" width="0.1524" layer="91"/>
+<wire x1="261.62" y1="114.3" x2="236.22" y2="114.3" width="0.1524" layer="91"/>
+<junction x="236.22" y="114.3"/>
 </segment>
 <segment>
 <pinref part="P+6" gate="1" pin="+5V"/>
 <pinref part="R8" gate="G$1" pin="2"/>
-<wire x1="233.68" y1="109.22" x2="233.68" y2="106.68" width="0.1524" layer="91"/>
+<wire x1="281.94" y1="109.22" x2="281.94" y2="106.68" width="0.1524" layer="91"/>
 </segment>
 </net>
 <net name="+3V3" class="0">
@@ -7664,12 +7963,12 @@ for trimmer refence see : &lt;u&gt;www.electrospec-inc.com/cross_references/trim
 <segment>
 <pinref part="R3" gate="G$1" pin="2"/>
 <pinref part="+3V4" gate="G$1" pin="+3V3"/>
-<wire x1="218.44" y1="58.42" x2="218.44" y2="60.96" width="0.1524" layer="91"/>
+<wire x1="266.7" y1="58.42" x2="266.7" y2="60.96" width="0.1524" layer="91"/>
 </segment>
 <segment>
 <pinref part="R4" gate="G$1" pin="2"/>
 <pinref part="+3V5" gate="G$1" pin="+3V3"/>
-<wire x1="226.06" y1="58.42" x2="226.06" y2="60.96" width="0.1524" layer="91"/>
+<wire x1="274.32" y1="58.42" x2="274.32" y2="60.96" width="0.1524" layer="91"/>
 </segment>
 <segment>
 <pinref part="R5" gate="G$1" pin="2"/>
@@ -7683,6 +7982,21 @@ for trimmer refence see : &lt;u&gt;www.electrospec-inc.com/cross_references/trim
 <pinref part="R7" gate="G$1" pin="2"/>
 <pinref part="+3V8" gate="G$1" pin="+3V3"/>
 </segment>
+<segment>
+<pinref part="TEMP" gate="G$1" pin="5"/>
+<pinref part="+3V9" gate="G$1" pin="+3V3"/>
+<wire x1="101.6" y1="17.78" x2="104.14" y2="17.78" width="0.1524" layer="91"/>
+<wire x1="104.14" y1="17.78" x2="104.14" y2="22.86" width="0.1524" layer="91"/>
+</segment>
+<segment>
+<pinref part="+3V10" gate="G$1" pin="+3V3"/>
+<pinref part="IC1" gate="P" pin="VCC"/>
+<wire x1="195.58" y1="73.66" x2="195.58" y2="71.12" width="0.1524" layer="91"/>
+<pinref part="C2" gate="G$1" pin="1"/>
+<wire x1="205.74" y1="68.58" x2="205.74" y2="71.12" width="0.1524" layer="91"/>
+<wire x1="205.74" y1="71.12" x2="195.58" y2="71.12" width="0.1524" layer="91"/>
+<junction x="195.58" y="71.12"/>
+</segment>
 </net>
 <net name="GND" class="0">
 <segment>
@@ -7722,11 +8036,6 @@ for trimmer refence see : &lt;u&gt;www.electrospec-inc.com/cross_references/trim
 <junction x="48.26" y="50.8"/>
 </segment>
 <segment>
-<pinref part="TASTER" gate="G$1" pin="1"/>
-<wire x1="101.6" y1="104.14" x2="127" y2="104.14" width="0.1524" layer="91"/>
-<label x="121.92" y="104.14" size="1.778" layer="95"/>
-</segment>
-<segment>
 <pinref part="FLOWCTRL" gate="G$1" pin="1"/>
 <pinref part="GND2" gate="1" pin="GND"/>
 <wire x1="101.6" y1="73.66" x2="114.3" y2="73.66" width="0.1524" layer="91"/>
@@ -7743,14 +8052,14 @@ for trimmer refence see : &lt;u&gt;www.electrospec-inc.com/cross_references/trim
 <segment>
 <pinref part="RELAIS1" gate="G$1" pin="1"/>
 <pinref part="GND4" gate="1" pin="GND"/>
-<wire x1="198.12" y1="10.16" x2="210.82" y2="10.16" width="0.1524" layer="91"/>
-<wire x1="210.82" y1="10.16" x2="210.82" y2="7.62" width="0.1524" layer="91"/>
+<wire x1="246.38" y1="10.16" x2="259.08" y2="10.16" width="0.1524" layer="91"/>
+<wire x1="259.08" y1="10.16" x2="259.08" y2="7.62" width="0.1524" layer="91"/>
 </segment>
 <segment>
 <pinref part="RELAIS2" gate="1" pin="1"/>
 <pinref part="GND3" gate="1" pin="GND"/>
-<wire x1="198.12" y1="38.1" x2="210.82" y2="38.1" width="0.1524" layer="91"/>
-<wire x1="210.82" y1="38.1" x2="210.82" y2="35.56" width="0.1524" layer="91"/>
+<wire x1="246.38" y1="38.1" x2="259.08" y2="38.1" width="0.1524" layer="91"/>
+<wire x1="259.08" y1="38.1" x2="259.08" y2="35.56" width="0.1524" layer="91"/>
 </segment>
 <segment>
 <pinref part="PRESSO" gate="G$1" pin="1"/>
@@ -7765,22 +8074,42 @@ for trimmer refence see : &lt;u&gt;www.electrospec-inc.com/cross_references/trim
 <segment>
 <pinref part="DISP" gate="G$1" pin="1"/>
 <pinref part="GND6" gate="1" pin="GND"/>
-<wire x1="208.28" y1="86.36" x2="210.82" y2="86.36" width="0.1524" layer="91"/>
-<wire x1="210.82" y1="86.36" x2="210.82" y2="81.28" width="0.1524" layer="91"/>
+<wire x1="256.54" y1="86.36" x2="259.08" y2="86.36" width="0.1524" layer="91"/>
+<wire x1="259.08" y1="86.36" x2="259.08" y2="81.28" width="0.1524" layer="91"/>
 <pinref part="DISP" gate="G$1" pin="16"/>
-<wire x1="210.82" y1="81.28" x2="210.82" y2="78.74" width="0.1524" layer="91"/>
-<wire x1="193.04" y1="104.14" x2="190.5" y2="104.14" width="0.1524" layer="91"/>
-<wire x1="190.5" y1="104.14" x2="190.5" y2="81.28" width="0.1524" layer="91"/>
-<wire x1="190.5" y1="81.28" x2="210.82" y2="81.28" width="0.1524" layer="91"/>
-<junction x="210.82" y="81.28"/>
+<wire x1="259.08" y1="81.28" x2="259.08" y2="78.74" width="0.1524" layer="91"/>
+<wire x1="241.3" y1="104.14" x2="238.76" y2="104.14" width="0.1524" layer="91"/>
+<wire x1="238.76" y1="104.14" x2="238.76" y2="81.28" width="0.1524" layer="91"/>
+<wire x1="238.76" y1="81.28" x2="259.08" y2="81.28" width="0.1524" layer="91"/>
+<junction x="259.08" y="81.28"/>
 </segment>
 <segment>
 <pinref part="R9" gate="1" pin="2"/>
 <pinref part="GND7" gate="1" pin="GND"/>
-<wire x1="233.68" y1="81.28" x2="233.68" y2="83.82" width="0.1524" layer="91"/>
+<wire x1="281.94" y1="81.28" x2="281.94" y2="83.82" width="0.1524" layer="91"/>
+</segment>
+<segment>
+<pinref part="TEMP" gate="G$1" pin="1"/>
+<wire x1="101.6" y1="7.62" x2="104.14" y2="7.62" width="0.1524" layer="91"/>
+<pinref part="GND8" gate="1" pin="GND"/>
+</segment>
+<segment>
+<pinref part="TASTER" gate="G$1" pin="1"/>
+<pinref part="GND9" gate="1" pin="GND"/>
+<wire x1="101.6" y1="104.14" x2="104.14" y2="104.14" width="0.1524" layer="91"/>
+<wire x1="104.14" y1="104.14" x2="104.14" y2="101.6" width="0.1524" layer="91"/>
+</segment>
+<segment>
+<pinref part="IC1" gate="P" pin="GND"/>
+<pinref part="GND10" gate="1" pin="GND"/>
+<wire x1="195.58" y1="55.88" x2="195.58" y2="53.34" width="0.1524" layer="91"/>
+<pinref part="C2" gate="G$1" pin="2"/>
+<wire x1="205.74" y1="60.96" x2="205.74" y2="55.88" width="0.1524" layer="91"/>
+<wire x1="205.74" y1="55.88" x2="195.58" y2="55.88" width="0.1524" layer="91"/>
+<junction x="195.58" y="55.88"/>
 </segment>
 </net>
-<net name="N$2" class="0">
+<net name="T1" class="0">
 <segment>
 <pinref part="TASTER" gate="G$1" pin="2"/>
 <wire x1="101.6" y1="106.68" x2="116.84" y2="106.68" width="0.1524" layer="91"/>
@@ -7791,7 +8120,7 @@ for trimmer refence see : &lt;u&gt;www.electrospec-inc.com/cross_references/trim
 <junction x="116.84" y="106.68"/>
 </segment>
 </net>
-<net name="N$3" class="0">
+<net name="T2" class="0">
 <segment>
 <pinref part="TASTER" gate="G$1" pin="3"/>
 <wire x1="101.6" y1="109.22" x2="109.22" y2="109.22" width="0.1524" layer="91"/>
@@ -7802,7 +8131,7 @@ for trimmer refence see : &lt;u&gt;www.electrospec-inc.com/cross_references/trim
 <junction x="109.22" y="109.22"/>
 </segment>
 </net>
-<net name="N$1" class="0">
+<net name="FLOW" class="0">
 <segment>
 <pinref part="FLOWCTRL" gate="G$1" pin="2"/>
 <wire x1="101.6" y1="76.2" x2="121.92" y2="76.2" width="0.1524" layer="91"/>
@@ -7818,9 +8147,10 @@ for trimmer refence see : &lt;u&gt;www.electrospec-inc.com/cross_references/trim
 <wire x1="132.08" y1="73.66" x2="132.08" y2="76.2" width="0.1524" layer="91"/>
 <junction x="132.08" y="76.2"/>
 <wire x1="132.08" y1="76.2" x2="147.32" y2="76.2" width="0.1524" layer="91"/>
+<label x="142.24" y="76.2" size="1.778" layer="95"/>
 </segment>
 </net>
-<net name="N$4" class="0">
+<net name="PR" class="0">
 <segment>
 <pinref part="PRESSO" gate="G$1" pin="2"/>
 <wire x1="101.6" y1="38.1" x2="109.22" y2="38.1" width="0.1524" layer="91"/>
@@ -7828,134 +8158,214 @@ for trimmer refence see : &lt;u&gt;www.electrospec-inc.com/cross_references/trim
 <wire x1="109.22" y1="38.1" x2="119.38" y2="38.1" width="0.1524" layer="91"/>
 <wire x1="109.22" y1="40.64" x2="109.22" y2="38.1" width="0.1524" layer="91"/>
 <junction x="109.22" y="38.1"/>
+<label x="114.3" y="38.1" size="1.778" layer="95"/>
 </segment>
 </net>
-<net name="N$5" class="0">
+<net name="R1" class="0">
 <segment>
 <pinref part="RELAIS2" gate="1" pin="3"/>
-<wire x1="198.12" y1="43.18" x2="218.44" y2="43.18" width="0.1524" layer="91"/>
+<wire x1="246.38" y1="43.18" x2="266.7" y2="43.18" width="0.1524" layer="91"/>
 <pinref part="R3" gate="G$1" pin="1"/>
-<wire x1="218.44" y1="43.18" x2="238.76" y2="43.18" width="0.1524" layer="91"/>
-<wire x1="218.44" y1="48.26" x2="218.44" y2="43.18" width="0.1524" layer="91"/>
-<junction x="218.44" y="43.18"/>
+<wire x1="266.7" y1="43.18" x2="287.02" y2="43.18" width="0.1524" layer="91"/>
+<wire x1="266.7" y1="48.26" x2="266.7" y2="43.18" width="0.1524" layer="91"/>
+<junction x="266.7" y="43.18"/>
+<label x="281.94" y="43.18" size="1.778" layer="95"/>
 </segment>
 </net>
-<net name="N$6" class="0">
+<net name="R2" class="0">
 <segment>
 <pinref part="RELAIS2" gate="1" pin="2"/>
-<wire x1="198.12" y1="40.64" x2="226.06" y2="40.64" width="0.1524" layer="91"/>
+<wire x1="246.38" y1="40.64" x2="274.32" y2="40.64" width="0.1524" layer="91"/>
 <pinref part="R4" gate="G$1" pin="1"/>
-<wire x1="226.06" y1="40.64" x2="238.76" y2="40.64" width="0.1524" layer="91"/>
-<wire x1="226.06" y1="48.26" x2="226.06" y2="40.64" width="0.1524" layer="91"/>
-<junction x="226.06" y="40.64"/>
+<wire x1="274.32" y1="40.64" x2="287.02" y2="40.64" width="0.1524" layer="91"/>
+<wire x1="274.32" y1="48.26" x2="274.32" y2="40.64" width="0.1524" layer="91"/>
+<junction x="274.32" y="40.64"/>
+<label x="281.94" y="40.64" size="1.778" layer="95"/>
 </segment>
 </net>
-<net name="N$7" class="0">
+<net name="R3" class="0">
 <segment>
 <pinref part="RELAIS1" gate="G$1" pin="2"/>
-<wire x1="198.12" y1="12.7" x2="218.44" y2="12.7" width="0.1524" layer="91"/>
+<wire x1="246.38" y1="12.7" x2="266.7" y2="12.7" width="0.1524" layer="91"/>
 <pinref part="R5" gate="G$1" pin="1"/>
-<wire x1="218.44" y1="12.7" x2="238.76" y2="12.7" width="0.1524" layer="91"/>
-<wire x1="218.44" y1="15.24" x2="218.44" y2="12.7" width="0.1524" layer="91"/>
-<junction x="218.44" y="12.7"/>
+<wire x1="266.7" y1="12.7" x2="287.02" y2="12.7" width="0.1524" layer="91"/>
+<wire x1="266.7" y1="15.24" x2="266.7" y2="12.7" width="0.1524" layer="91"/>
+<junction x="266.7" y="12.7"/>
+<label x="281.94" y="12.7" size="1.778" layer="95"/>
 </segment>
 </net>
 <net name="N$8" class="0">
 <segment>
 <pinref part="R8" gate="G$1" pin="1"/>
 <pinref part="R9" gate="1" pin="1"/>
-<wire x1="233.68" y1="96.52" x2="233.68" y2="93.98" width="0.1524" layer="91"/>
+<wire x1="281.94" y1="96.52" x2="281.94" y2="93.98" width="0.1524" layer="91"/>
 </segment>
 </net>
 <net name="N$9" class="0">
 <segment>
 <pinref part="R9" gate="1" pin="3"/>
 <pinref part="DISP" gate="G$1" pin="3"/>
-<wire x1="228.6" y1="88.9" x2="208.28" y2="88.9" width="0.1524" layer="91"/>
+<wire x1="276.86" y1="88.9" x2="256.54" y2="88.9" width="0.1524" layer="91"/>
 </segment>
 </net>
 <net name="N$10" class="0">
 <segment>
 <pinref part="DISP" gate="G$1" pin="15"/>
 <pinref part="R10" gate="G$1" pin="1"/>
-<wire x1="208.28" y1="104.14" x2="213.36" y2="104.14" width="0.1524" layer="91"/>
+<wire x1="256.54" y1="104.14" x2="261.62" y2="104.14" width="0.1524" layer="91"/>
 </segment>
 </net>
 <net name="RS" class="0">
 <segment>
 <pinref part="DISP" gate="G$1" pin="4"/>
-<wire x1="193.04" y1="88.9" x2="177.8" y2="88.9" width="0.1524" layer="91"/>
-<label x="177.8" y="88.9" size="1.778" layer="95"/>
+<wire x1="241.3" y1="88.9" x2="226.06" y2="88.9" width="0.1524" layer="91"/>
+<label x="226.06" y="88.9" size="1.778" layer="95"/>
 </segment>
 </net>
 <net name="E" class="0">
 <segment>
 <pinref part="DISP" gate="G$1" pin="6"/>
-<wire x1="193.04" y1="91.44" x2="177.8" y2="91.44" width="0.1524" layer="91"/>
-<label x="177.8" y="91.44" size="1.778" layer="95"/>
+<wire x1="241.3" y1="91.44" x2="226.06" y2="91.44" width="0.1524" layer="91"/>
+<label x="226.06" y="91.44" size="1.778" layer="95"/>
 </segment>
 </net>
 <net name="D1" class="0">
 <segment>
 <pinref part="DISP" gate="G$1" pin="8"/>
-<wire x1="193.04" y1="93.98" x2="177.8" y2="93.98" width="0.1524" layer="91"/>
-<label x="177.8" y="93.98" size="1.778" layer="95"/>
+<wire x1="241.3" y1="93.98" x2="226.06" y2="93.98" width="0.1524" layer="91"/>
+<label x="226.06" y="93.98" size="1.778" layer="95"/>
+</segment>
+<segment>
+<pinref part="IC1" gate="A" pin="QB"/>
+<wire x1="208.28" y1="106.68" x2="215.9" y2="106.68" width="0.1524" layer="91"/>
+<label x="213.36" y="106.68" size="1.778" layer="95"/>
 </segment>
 </net>
 <net name="D3" class="0">
 <segment>
 <pinref part="DISP" gate="G$1" pin="10"/>
-<wire x1="193.04" y1="96.52" x2="177.8" y2="96.52" width="0.1524" layer="91"/>
-<label x="177.8" y="96.52" size="1.778" layer="95"/>
+<wire x1="241.3" y1="96.52" x2="226.06" y2="96.52" width="0.1524" layer="91"/>
+<label x="226.06" y="96.52" size="1.778" layer="95"/>
+</segment>
+<segment>
+<pinref part="IC1" gate="A" pin="QD"/>
+<wire x1="208.28" y1="101.6" x2="215.9" y2="101.6" width="0.1524" layer="91"/>
+<label x="213.36" y="101.6" size="1.778" layer="95"/>
 </segment>
 </net>
 <net name="D5" class="0">
 <segment>
 <pinref part="DISP" gate="G$1" pin="12"/>
-<wire x1="193.04" y1="99.06" x2="177.8" y2="99.06" width="0.1524" layer="91"/>
-<label x="177.8" y="99.06" size="1.778" layer="95"/>
+<wire x1="241.3" y1="99.06" x2="226.06" y2="99.06" width="0.1524" layer="91"/>
+<label x="226.06" y="99.06" size="1.778" layer="95"/>
+</segment>
+<segment>
+<pinref part="IC1" gate="A" pin="QF"/>
+<wire x1="208.28" y1="96.52" x2="215.9" y2="96.52" width="0.1524" layer="91"/>
+<label x="213.36" y="96.52" size="1.778" layer="95"/>
 </segment>
 </net>
 <net name="D7" class="0">
 <segment>
 <pinref part="DISP" gate="G$1" pin="14"/>
-<wire x1="193.04" y1="101.6" x2="177.8" y2="101.6" width="0.1524" layer="91"/>
-<label x="177.8" y="101.6" size="1.778" layer="95"/>
+<wire x1="241.3" y1="101.6" x2="226.06" y2="101.6" width="0.1524" layer="91"/>
+<label x="226.06" y="101.6" size="1.778" layer="95"/>
+</segment>
+<segment>
+<pinref part="IC1" gate="A" pin="QH"/>
+<wire x1="208.28" y1="91.44" x2="215.9" y2="91.44" width="0.1524" layer="91"/>
+<label x="213.36" y="91.44" size="1.778" layer="95"/>
 </segment>
 </net>
 <net name="R/W" class="0">
 <segment>
 <pinref part="DISP" gate="G$1" pin="5"/>
-<wire x1="208.28" y1="91.44" x2="223.52" y2="91.44" width="0.1524" layer="91"/>
-<label x="218.44" y="91.44" size="1.778" layer="95"/>
+<wire x1="256.54" y1="91.44" x2="271.78" y2="91.44" width="0.1524" layer="91"/>
+<label x="266.7" y="91.44" size="1.778" layer="95"/>
 </segment>
 </net>
 <net name="D0" class="0">
 <segment>
 <pinref part="DISP" gate="G$1" pin="7"/>
-<wire x1="208.28" y1="93.98" x2="223.52" y2="93.98" width="0.1524" layer="91"/>
-<label x="218.44" y="93.98" size="1.778" layer="95"/>
+<wire x1="256.54" y1="93.98" x2="271.78" y2="93.98" width="0.1524" layer="91"/>
+<label x="266.7" y="93.98" size="1.778" layer="95"/>
+</segment>
+<segment>
+<pinref part="IC1" gate="A" pin="QA"/>
+<wire x1="208.28" y1="109.22" x2="215.9" y2="109.22" width="0.1524" layer="91"/>
+<label x="213.36" y="109.22" size="1.778" layer="95"/>
 </segment>
 </net>
 <net name="D2" class="0">
 <segment>
 <pinref part="DISP" gate="G$1" pin="9"/>
-<wire x1="208.28" y1="96.52" x2="223.52" y2="96.52" width="0.1524" layer="91"/>
-<label x="218.44" y="96.52" size="1.778" layer="95"/>
+<wire x1="256.54" y1="96.52" x2="271.78" y2="96.52" width="0.1524" layer="91"/>
+<label x="266.7" y="96.52" size="1.778" layer="95"/>
+</segment>
+<segment>
+<pinref part="IC1" gate="A" pin="QC"/>
+<wire x1="208.28" y1="104.14" x2="215.9" y2="104.14" width="0.1524" layer="91"/>
+<label x="213.36" y="104.14" size="1.778" layer="95"/>
 </segment>
 </net>
 <net name="D4" class="0">
 <segment>
 <pinref part="DISP" gate="G$1" pin="11"/>
-<wire x1="208.28" y1="99.06" x2="223.52" y2="99.06" width="0.1524" layer="91"/>
-<label x="218.44" y="99.06" size="1.778" layer="95"/>
+<wire x1="256.54" y1="99.06" x2="271.78" y2="99.06" width="0.1524" layer="91"/>
+<label x="266.7" y="99.06" size="1.778" layer="95"/>
+</segment>
+<segment>
+<pinref part="IC1" gate="A" pin="QE"/>
+<wire x1="208.28" y1="99.06" x2="215.9" y2="99.06" width="0.1524" layer="91"/>
+<label x="213.36" y="99.06" size="1.778" layer="95"/>
 </segment>
 </net>
 <net name="D6" class="0">
 <segment>
 <pinref part="DISP" gate="G$1" pin="13"/>
-<wire x1="208.28" y1="101.6" x2="223.52" y2="101.6" width="0.1524" layer="91"/>
-<label x="218.44" y="101.6" size="1.778" layer="95"/>
+<wire x1="256.54" y1="101.6" x2="271.78" y2="101.6" width="0.1524" layer="91"/>
+<label x="266.7" y="101.6" size="1.778" layer="95"/>
+</segment>
+<segment>
+<pinref part="IC1" gate="A" pin="QG"/>
+<wire x1="208.28" y1="93.98" x2="215.9" y2="93.98" width="0.1524" layer="91"/>
+<label x="213.36" y="93.98" size="1.778" layer="95"/>
+</segment>
+</net>
+<net name="CS" class="0">
+<segment>
+<pinref part="TEMP" gate="G$1" pin="4"/>
+<wire x1="101.6" y1="15.24" x2="114.3" y2="15.24" width="0.1524" layer="91"/>
+<label x="109.22" y="15.24" size="1.778" layer="95"/>
+</segment>
+<segment>
+<pinref part="SV1" gate="G$1" pin="24"/>
+<wire x1="30.48" y1="68.58" x2="15.24" y2="68.58" width="0.1524" layer="91"/>
+<label x="15.24" y="68.58" size="1.778" layer="95"/>
+</segment>
+</net>
+<net name="MISO" class="0">
+<segment>
+<pinref part="TEMP" gate="G$1" pin="3"/>
+<wire x1="101.6" y1="12.7" x2="114.3" y2="12.7" width="0.1524" layer="91"/>
+<label x="109.22" y="12.7" size="1.778" layer="95"/>
+</segment>
+<segment>
+<pinref part="SV1" gate="G$1" pin="21"/>
+<wire x1="45.72" y1="66.04" x2="66.04" y2="66.04" width="0.1524" layer="91"/>
+<label x="60.96" y="66.04" size="1.778" layer="95"/>
+</segment>
+</net>
+<net name="SCK" class="0">
+<segment>
+<pinref part="TEMP" gate="G$1" pin="2"/>
+<wire x1="101.6" y1="10.16" x2="114.3" y2="10.16" width="0.1524" layer="91"/>
+<label x="109.22" y="10.16" size="1.778" layer="95"/>
+</segment>
+<segment>
+<pinref part="SV1" gate="G$1" pin="23"/>
+<wire x1="45.72" y1="68.58" x2="66.04" y2="68.58" width="0.1524" layer="91"/>
+<label x="60.96" y="68.58" size="1.778" layer="95"/>
 </segment>
 </net>
 </nets>